Reg. Price:
    $229.00
    Sale Price:
    $185.00
    Save:
    $44.00
    Items Remaining:17

    4150 CMV 5.56 barrel with a more accurate 223 Wylde chamber and Hybrid 5R rifling, 8 twist, 1/2-28 thread .
    M4 feed ramps, mid length gas system, .750 gas block, 11 degree crown.
    Melonite treated barrels have proven to last 30% longer than chromelined barrels and are more accurate.  Hi perf. chamber and barrel allow for ANY factory ammo to be used or gain more  with  handloads.

    For use on pistols or NFA registered SBR lowers only. All NFA laws apply.

    Reg. Price:
    $249.00
    Sale Price:
    $185.00
    Save:
    $64.00
    Items Remaining:3

    Barrel is a lightweight profile 5.56 (1lb 11oz). Steel is 4150 11595-e milspec CMV alloy, Melonite treated barrels have shown to last 30% longer than chromelined barrels and twice as long as stainless while being more corrosion resistant. 

    16" 1 in 8 twist Hybrid 5R rifling, 1/2-28 threaded muzzle(standard for 5.56), mid length gas system, uses a standard .750 gas block like all of our barrels.

    Wylde chamber shoots 223 and 556 ammo and is more accurate
    All barrels have M4 feed ramps
    All barrels use .750 gas blocks
    Barrel  .700- under the guard. .700 from the gas block forward.
    These are lightweight combat type barrels not target barrels. Like all barrels with 1/2-28 threaded muzzles they will not be as accurate as a barrel with a target crown or 5/8-24 thread. Common accuracy with decent ammo is 3/4-1.25" at 100yds, cheap surplus 55gr and 62gr  FMJ can be worse(2") but 69gr and 77gr SMks can be much better.

    This is a barrel only, it does not include any other parts.

    Reg. Price:
    $269.00
    Sale Price:
    $190.00
    Save:
    $79.00
    Items Remaining:out of stock


    18" SPR contour with a rifle length gas system to soften the recoil impulse for the fastest follow up shots.

    223 Wylde chamber  4150 CMV,  1 in 8" twist  5R rifling , .850 under the guard, .750 gas block, .720 from the gas block forward.

    Threaded 1/2-28, M4 feed ramps,  2lb 5oz -Shoots all 223 and 5.56 ammo.
    Melonite treated barrels have proven to near twice as long as stainless barrels and are just as  accurate.

    This barrel is primarily a 3 gun barrel but is also very accurate and could be a good varmint or target barrel

    Reg. Price:
    $279.00
    Sale Price:
    $185.00
    Save:
    $94.00
    Items Remaining:out of stock

    In stock

    223 Wylde match chamber  4150 CMV  8 twist  5R.
    M4 feed ramps, .850 dia. under the guard, .730 dia. in front of the gas block.
    Rifle length gas system, .750 gas block, 2lb 13oz--NOTE these barrels have a 5/8-24 muzzle thread.
    Melonite treated barrels have proven to near twice as long as stainless barrels and are just as  accurate. 

    A .223 Wylde will handle full strength 5.56 military loads. All .223 and 5.56 chambers use the same "go" and "no-go" gauges.

    Reg. Price:
    $200.00
    Sale Price:
    $185.00
    Save:
    $15.00
    Items Remaining:out of stock

    4150 CMV 6.8 barrel with a more accurate 6.8 ARP chamber and Hybrid 5R rifling 11.25 twist . 1lb-7oz
    M4 feed ramps, mid length gas system, .750 gas block
    Melonite treated barrels have proven to last 30% longer than chromelined barrels and are more accurate.  Hi perf. chamber and barrel allow for ANY factory ammo to be used or gain more  with  handloads. We recommend Hornady ammo HPBT for target and 120SST for deer and hogs.

    For use on pistols or NFA registered SBR lowers only. All NFA laws apply.

    Reg. Price:
    $200.00
    Sale Price:
    $185.00
    Save:
    $15.00
    Items Remaining:3

    In stock

    4150 CMV 6.8 Scout profile barrel with Hybrid 5R rifling 11.25 twist . 1lb-12oz
    M4 feed ramps, mid length gas system, .700 under the guard, .750 gas block dia. .700 dia from gas block to muzzle.  5/8-24 thread muzzle.
      Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads.
    These 5R barrels usually produce 60-80fps more than the common 11 twist 4 groove barrels and are as fast as some 20" barrels.
    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance. 
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action, call if  you plan to use this plinking ammo.
    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $200.00
    Sale Price:
    $185.00
    Save:
    $15.00
    Items Remaining:out of stock

    4150 CMV 6.8 Socom profile barrel (No Flutes) Has the  accurate ARP chamber and Hybrid 5R rifling 11.25 twist . 2lb-0oz
    M4 feed ramps, mid length gas system, .800 under the guard, .750 gas block dia. .700 dia from gas block to muzzle.  5/8-24 thread muzzle.
    Melonite treated barrels have proven to last 30% longer than chromelined barrels and are more accurate.
    These barrels are as accurate as any 6.8 barrels made, many report 1/2" groups at 100yds with Hornady 110gr HPBT factory ammo.
    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance. 
    This is a barrel only, it does NOT include any other parts unless added below as an option.
    Bullfrog products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $299.00
    Sale Price:
    $250.00
    Save:
    $49.00
    Items Remaining:10

    4150 CMV 6.8 Socom profile barrel with a more accurate ARP chamber and Hybrid 5R rifling 11.25 twist . 1lb-14oz
    M4 feed ramps, mid length gas system, .800 under the guard, .750 gas block dia. .700 dia from gas block to muzzle.  Fluted. 5/8-24 thread muzzle.
    Melonite treated barrels have proven to last 30% longer than chromelined barrels and are more accurate.
    These barrels are as accurate as any 6.8 barrels made, many report 1/2" groups at 100yds with Hornady 110gr HPBT factory ammo.
    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance.
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.
    Bullfrog products are known to cause discoloration of Melonite surfaces.

     Barrel has helical flutes

    Reg. Price:
    $269.00
    Sale Price:
    $190.00
    Save:
    $79.00
    Items Remaining:3

    Profile .800" under the guard, .750"GB, .700" from the gas block forward, 5/8 threaded muzzle, 2lb2oz,

    4150 CMV 6.8 barrel with a more accurate 6.8 ARP chamber and Hybrid 5R rifling 11.25 twist .
    M4 feed ramps, mid length gas system, .750 gas block dia. like all of our barrels.

      Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads.
    These 5R barrels usually produce 60-80fps more than the common 11 twist 4 groove barrels and are as fast as some 20" barrels. These barrels are as accurate as any 6.8 barrels made, many report 1/2" groups at 100yds with Hornady 110gr HPBT factory ammo.
    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance.  416 stainless barrels .980" in diameter do not meet the 2:1 burst/hoop strength safety ratio required by the firearms industry standards in anything larger than the 5.56. We only use the stronger 4150 11595 E barrel steel in all of our barrels.
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action with a .078 gas port, call or note on order if  you plan to use this plinking ammo.

    Reg. Price:
    $269.00
    Sale Price:
    $150.00
    Save:
    $119.00
    Items Remaining:out of stock

    This 1 barrel was mounted in a build then diaassembled. Has indents where the gas block screws were tightened. Barrel unused.

    Profile .800" under the guard, .750"GB, .700" from the gas block forward, 5/8 threaded muzzle, 2lb2oz,

    4150 CMV 6.8 barrel with a more accurate 6.8 ARP chamber and Hybrid 5R rifling 11.25 twist .
    M4 feed ramps, mid length gas system, .750 gas block dia. like all of our barrels.

      Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads.
    These 5R barrels usually produce 60-80fps more than the common 11 twist 4 groove barrels and are as fast as some 20" barrels. These barrels are as accurate as any 6.8 barrels made, many report 1/2" groups at 100yds with Hornady 110gr HPBT factory ammo.
    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance.  416 stainless barrels .980" in diameter do not meet the 2:1 burst/hoop strength safety ratio required by the firearms industry standards in anything larger than the 5.56. We only use the stronger 4150 11595 E barrel steel in all of our barrels.
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action with a .078 gas port, call or note on order if  you plan to use this plinking ammo.

    Reg. Price:
    $200.00
    Sale Price:
    $190.00
    Save:
    $10.00
    Items Remaining:4

    Read this description carefully- certain dies are required. The DMR is a match chamber. The chamber was designed to be more accurate and keep the brass from swelling at the base. Hornady FL or RCBS small base dies are required.
    SSA brass is made .415" dia, Hornady brass is .417" dia. The DMR chamber is .420 dia. This allows the new SSA to expand .005 and the Hornady to expand .003". The correct dies will size the brass back to .418". After the first firing both brands of brass can only expand .002". The alignment of the cartridge will be much better and the brass will last longer.

    4150 CMV-
    Profile .800" under the guard, .750"GB, .700" from the gas block forward, 5/8 threaded muzzle, 2lb2oz,
    6.8 barrel with a more accurate 6.8 DMR chamber, Hybrid 5R rifling 1 in 11.25 twist and 11 degree crown.
    M4 feed ramps, mid length gas system.

      Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads.
    These 5R barrels usually produce 60-80fps more than the common 11 twist 4 groove barrels and are as fast as some 20" barrels. These barrels are as accurate as any 6.8 barrels made, many report 1/2" groups at 100yds with Hornady 110gr HPBT factory ammo.
    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance. 
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action with a .078 gas port, call or note on order if  you plan to use this plinking ammo.

    Reg. Price:
    $200.00
    Sale Price:
    $190.00
    Save:
    $10.00
    Items Remaining:out of stock

    Due- July
    Profile .800" under the guard, .750" dia for gas block, .700" from the gas block forward, muzzle not threaded,  2lb2oz,

    TRIAD  4150 CMV 6.8 barrel with a more accurate 6.8 ARP chamber and Hybrid 3R rifling  with 1 in 10" twist .
    3R 10 twist will help with the longer 130gr VLDs while the low L-G ratio 3R rifling will allow even faster handloads.
     This chamber has a freebore .015" shorter than a SPCII to increase accuracy.
    11 degree target crown, M4 feed ramps, mid length gas system.
    Hornady factory 110gr HPBT @ 2.26" OAL is very accurate in these barrels.

      Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads.
    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance.
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action with a .078 gas port, call or note on order if  you plan to use this plinking ammo.

    Reg. Price:
    $200.00
    Sale Price:
    $190.00
    Save:
    $10.00
    Items Remaining:out of stock

    Due- July

    Read this description carefully- certain dies are required. The DMR is a match chamber. The chamber was designed to be more accurate and keep the brass from swelling at the base. Hornady FL or RCBS small base dies are required.
    SSA brass is made .415" dia, Hornady brass is .417" dia. The DMR chamber is .420 dia. This allows the new SSA to expand .005 and the Hornady to expand .003". The correct dies will size the brass back to .418". After the first firing both brands of brass can only expand .002". The alignment of the cartridge will be much better and the brass will last longer.


    Profile .800" under the guard, .750" dia for gas block, .700" from the gas block forward, muzzle not threaded,  2lb2oz,

    TRIAD  4150 CMV 6.8 barrel with THE dmr MATCH chamber and Hybrid 3R rifling  with 1 in 10" twist .
    3R 10 twist will help with the longer 130gr VLDs while the low L-G ratio 3R rifling will allow even faster handloads.
     This chamber has a freebore .015" shorter than a SPCII to increase accuracy.
    11 degree target crown, M4 feed ramps, mid length gas system.
    Hornady factory 110gr HPBT @ 2.26" OAL is very accurate in these barrels.

      Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads.
    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance.
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action with a .078 gas port, call or note on order if  you plan to use this plinking ammo.

    Reg. Price:
    $279.00
    Sale Price:
    $190.00
    Save:
    $89.00
    Items Remaining:8

      In stock 2/12/15

    4150 CMV alloy  1 in 11.25" twist  5R rifling,  threaded 5/8-24. 2lbs-10oz
    M4 feed ramps, rifle length gas system, .750" gas block, .850" diameter  under the guard and .720" forward of the gas block.

    Hi performance chamber shoots ANY factory 6.8 ammo. This chamber has a freebore .015" shorter than the SPCII.
    Hornady factory 110gr HPBT at 2.26" OAL is very accurate in these barrels.
     
     

    Reg. Price:
    $279.00
    Sale Price:
    $150.00
    Save:
    $129.00
    Items Remaining:3

      SPC II chamber

    4150 CMV alloy  1 in 11.25" twist  5R rifling,  threaded 5/8-24. 2lbs-10oz
    M4 feed ramps, rifle length gas system, .750" gas block, .850" diameter  under the guard and .720" forward of the gas block.

    SPC II chamber shoots ANY factory 6.8 ammo.
     
     

    Reg. Price:
    $279.00
    Sale Price:
    $190.00
    Save:
    $89.00
    Items Remaining:8

    4150 CMV alloy  1 in 11.25" twist  5R rifling. TARGET CROWN 2lbs-10oz
    M4 feed ramps, rifle length gas system, .750" gas block, .850" diameter  under the guard and .720" forward of the gas block.
     The chamber we use is a high performance chamber. It will shoot any factory ammo and faster handloads. The freebore is .015" shorter than the SPCII. That small change helps accuracy. Hornady factory 110gr HPBT @2.26" OAL is very accurate in these barrels.
     

    Reg. Price:
    $279.00
    Sale Price:
    $190.00
    Save:
    $89.00
    Items Remaining:10

    Read this description carefully- certain dies are required. The DMR is a match chamber. The chamber was designed to be more accurate and keep the brass from swelling at the base. Hornady FL or RCBS small base dies are required.
    SSA brass is made .415" dia, Hornady brass is .417" dia. The DMR chamber is .420 dia. This allows the new SSA to expand .005 and the Hornady to expand .003". The correct dies will size the brass back to .418". After the first firing both brands of brass can only expand .002". The alignment of the cartridge will be much better and the brass will last longer.

     

    4150 CMV alloy  1 in 11.25" twist  5R rifling. TARGET CROWN 2lbs-10oz
    M4 feed ramps, rifle length gas system, .750" gas block, .850" diameter  under the guard and .720" forward of the gas block.
     
     

    Reg. Price:
    $279.00
    Sale Price:
    $115.00
    Save:
    $164.00
    Items Remaining:4

    Special offer-

    Savage  bolt action barrel(small shank)-20"  4150 CMV alloy,  1 in 10" twist,  3R rifling, magnum profile threaded 5/8-24. Melonite treated.

    These barrels were rifled with another companies button design.  They are very accurate but, the lands are thinner (width not height) than what I wanted and may not last as  long due to thin lands. If you only shoot 30-40 rounds a year hunting they may last a lifetime. Should be accurate for 3000 shots. No returns

    2lbs-14oz-

    Will update photo

    They say it is easiest to modify the 308 Savage mags to work.

    Pacific Tool and Gauge or "MCA" on 68 forums has bolt heads for the 6.8 diameter.

     

    Reg. Price:
    $279.00
    Sale Price:
    $185.00
    Save:
    $94.00
    Items Remaining:out of stock

    This is a wildcat based on the 6.8 SPC case.

    We have discontinued the 264LBC/Grendel to make what we believe is a better mousetrap. By trimming the 6.8 case back to 1.620-1.625  the Hornady 123 Amax and SST, Barnes 100 and 120 TTSX, 120 TSX. Nosler 100 and 120 NBT and Lapua 100 Scenar can be loaded to the cannelure in a 41mm long 6.8 case to 2.3"and fit in unmodified Magpul SIX8 pmags or PRI 6.8 mags. Still there is enough full diameter bullet to properly align the bullet in the freebore. Some other 6.5x6.8 versions on the market are full length cases 43mm long and require cutting out the front of the mag to properly load long bullets into the case.
    The SIX5 is the best of both worlds. It has the high BC 6.5 bullets but uses stronger 6.8 bolts, better mags and plentiful 6.8 brass. Performance duplicates the 264LBC/Grendel.

    4150 CMV 11595E barrel steel. Barrels have a Hybrid 5R rifling with 1 in  8.5 twist .
      Barrels have M4 feed ramps, mid length gas system, .800 under the guard, .750 gas block dia. .700 dia from gas block to muzzle.  5/8-24 thread muzzle. Barrels have helical flutes ($120 option in many places)

    6.8 bushing dies with a .288-.290 bushing and trimming the case to 1.620" is all that is needed. The chamber has a .297 neck 1.5 degree throat angle for better accuracy and to prevent splitting the case necks from over working the brass. 
    Barrels are headspaced using 6.8 headspace gauges. 6.8 Bushing dies are used to resize the brass, a special die is NOT needed.
    Melonite treated barrels have proven to last 30% longer than chromelined barrels and are more accurate.
    This is a barrel only, it does NOT include any other parts unless added below as an option.

    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance.  

    .
    Bullfrog Rusthunter is known to cause discoloration of Melonite surfaces.
    NOTE: When forming the brass the first time it must be done correctly to get good accuracy. When setting the shoulder location it is best to set the dies .002-.004" under the chamber size.

     

    Top results below from 20" Krieger reduce velocity 100fps for apx vel of 16" barrels
    All loads should be considered max. Start 1-2gr lower and workup while looking for accuracy.

    123 Amax 2.295" OAL SSA brass, CCI450 primer
    8208-28.5gr=2501fps>56400psi
    2520-30gr=2556fps>57800psi
    2200-26gr=2510fps>58200psi
    N530-27.5gr=2575fps>57500psi
    CFE-32gr=2593fps>54500psi---max fill
    Xterm-29.5gr 2608fps>59422psi


    100gr Amax-same specs
    N530-29.5gr=2888fps>59700psi---29 max
    8208-29.8gr=2784fps>56669psi--max fill
    N200-27.5gr=2838fps>59460psi
    RE7-26.5gr=2805fps>58200psi
    2200-28gr=2820fps>59730psi
    10X-28.gr=2863fps>57500psi
    H335-31gr=2847fps>56100psi
    CFE-33gr=2797fps>52000psi--max fill
    X-term31.5gr 2875>56388psi

    Reg. Price:
    $449.00
    Sale Price:
    $415.00
    Save:
    $34.00
    Items Remaining:1

    20" 6.5BRX barrel made from 4150 alloy then Melonite treated for long life. 1 in 8.5 twist 5R rifling.
    muzzle threads 5/8-24.  .850 diameter under the guard, .720 in front of the gas block. Rifle length gas system.

    Barrel comes with 800 series bolt and extension.

    Whidden Custom dies with micrometer seating die avail below as an option $179.

    6mmBR brass may be used, requires fireforming.6.5x47, Creedmoor or 308 brass may also be used.
    See the Facebook group 6.5BRX or the AR Performance area of 68forums for more info.
    The 6.5BRX will propel 123gr bullets to 2750-2850fps from a 20" barrel.

    Move pointer over photo to enlarge

    Reg. Price:
    $479.00
    Sale Price:
    $395.00
    Save:
    $84.00
    Items Remaining:out of stock

     Reserved for Ron-

    -An AR15  full power wildcat based on the 6.5x47 Lapua. Great terminal performance for hunting deer & hogs, possibly the best available on the AR15 platform. The 270AR is a hunting cartridge, mainly designed to get an AR15 shooting the wide 130gr range of .277 bullets. 270 bullets are some of the best hunting bullets considering the balance of weight and BC. 

    A 130gr bullet can reach  2750-2800fps out of the 20" barrel using 8208 and CFE powder. That is equal to factory 260 Rem velocity!   The Berger has a BC of .452 or .492 depending on model, it should make for a great long distance load for those that like to combine target shooting with their hunting rifle.
     

    4150 CMV 11.25 twist, 5R rifling, Target crown, they are not threaded.
    M4 feed ramps, rifle length gas system, .750 gas block
    Melonite treated barrels have proven to near twice as long as stainless barrels and are just as  accurate. 

    270 AR  barrels are only sold with a matching 9310 alloy .800 series bolt, shipping is included.

    Modified 6.5x47 bushing or Custom Whidden 270AR dies are used to form the shortened brass, no fireforming required. Lapua brass will last longer but requires a little neck turning. We recommend using Hornady Creedmoor brass, it is less expensive,  apx half the cost of the Lapua and no neck turning is needed.

    Complete forming instruction and some load data is available on 68forums.com.

    Reg. Price:
    $279.00
    Sale Price:
    $185.00
    Save:
    $94.00
    Items Remaining:out of stock

    4150 CMV 30 Herrett SOCOM profile, HELICAL FLUTED barrel, Hybrid 5R rifling 11.25 twist . 1lb-12oz
    M4 feed ramps, mid length gas system, .800 under the guard, .750 gas block dia. .700 dia from gas block to muzzle.  5/8-24 thread muzzle.

    30 Herrett  reloading dies are used with a 6.8 shell holder. Any 6.8 SPC brass, Trim to 1.570-1.580" max case length.
    The 30 Herrett in an AR can be loaded to higher pressures than the old TC pistols. With 125-130gr bullets 4198 and RE7 work well.  Hornady 30 Herrett dies seem to work best. The 30 Herrett was a wildcat many years aho and the older dies vary in size.

    28.5gr 1680 behind a 125 TNT hit 2500fps out of a 16" barrel.
    30gr 1680=2594fps
    30.5gr 1680 =2655 and I think there is more room to go up.

    150gr Nosler BT-27.5gr 1680=2366fps

    This is a complete barrel only, it does NOT include any other parts unless added below as an option.


    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $279.00
    Sale Price:
    $190.00
    Save:
    $89.00
    Items Remaining:31

    In STOCK - "Yote Smoker"

    The 5.56x42 is a 6.8 based wildcat we designed in 2008 to allow the use of the 75Amax at mag length.  3050fps+ is possible from a 20" barrel. 55gr Noslers will hit 3450 easy enough. 6.8 bushing dies are used  to neck the case down then trim them to 42mm(1.640) where the ogive of the 75 Amax will be outside the case mouth. A 22 cal seater stem is needed to seat the bullet.

      4150 CMV  8 twist  5R.
    M4 feed ramps, .850 dia. under the guard, .730 dia. in front of the gas block.
    Rifle length gas system, .750 gas block, 2lb 13oz--NOTE these barrels have a 5/8-24 muzzle thread.
    Melonite treated barrels have proven to near twice as long as stainless barrels and are just as  accurate. 

    The loads below are MAX loads-DO NOT load past. Good accuracy will likely be found 1gr below, start 2 grains below and work up. Be sure to size brass(shoulder).002" below chamber size to get the best performance. Resizing the brass too small is the same as excessive headspace.

    -75 Amax 2.295" 20" barrel
    N550-29.5gr-2976fps-55695psi
    N540-28gr-3016fps-56700psi
    CFE-30gr -3082fps-57840psi
    LEVER-29.5gr-3086fps-57100
    H414-30.6gr-3050-58390
    RE17-30gr-2998-55000psi---max fill

    62gr TSX-2.245OAL
    Lever-31gr-3321fps-54265psi
    Lever-32gr-3466fps-58320psi

    55gr NBT -2.174"OAL
    Lever-32gr-3491fps-55037-max case fill
    N530-28.5gr-3498-58702psi
    CFE -31gr-3357-57490psi

    Some like the little 17 and 20 cal cartridges. If you like light bullets in those a 22 cal will push the same weight bullet faster.

     

    Reg. Price:
    $239.00
    Sale Price:
    $135.00
    Save:
    $104.00
    Items Remaining:out of stock

    The 6.8/223 is a wildcat based on the 223/5.56. The brass is shortened to 1.535 then sized to use .277/6.8bullets. It uses any 5.56 mag and bolt.
    4150 CMV .277 Scout profile barrel with Hybrid 5R rifling 11.25 twist . 1lb-12oz
    M4 feed ramps, mid length gas system, .700 under the guard, .750 gas block dia. .700 dia from gas block to muzzle.  5/8-24 thread muzzle.

    The 4150 11595E steel Melonite(QPQ) treated barrels we sell will last twice as long as stainless barrels-60 rockwell VS 28-30 of the stainless. The  final finish meets or exceeds stainless steel corrosion resistance. 
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.
    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $325.00
    Sale Price:
    $275.00
    Save:
    $50.00
    Items Remaining:1

    6mm Wildcat based on the 6.8 brass.  Shortened 6mm Hagar dies are used to form the brass. Performance is similar to a 6mmAR but the 6.8 bolt is stronger and 6.8 mags feed better. The 95gr SMK will reach apx 2850 from a 20" barrel.

    Barrel is 4150 CMV and Melonite treated. 1 in 8 twist lapped match grade bore.

    Barrel is threaded 5/8-24

     

      This business supports AMERICA
      The American flag is the symbol of this great nation. If you disrespect the flag you do not deserve to live under it.
      It took 3% of the American population to win it's independence. There are a lot more that will fight to win this country back now.

      Beene Enterprises International
      PO Box 1981
      Morristown, Tn 37816

      The best way to contact is by email
      Email:  info@ar15performance.com 

      Phone: 423-353-1107  8am-5pm eastern time  M-Thurs only

      We're in business for the working American man.

      The 6.8 is the fastest growing cartridge and #1 choice for hunting deer and hogs with an AR15.