Custom barrels, uppers and rifles
ITS-12
We have a small qty of mid sized uppers that fit on a DPMS lower receiver, they weigh apx
2lbs less than a standard LR308 and use AR15 rails or float tubes. We can chamber them
in 308, 7mm-08, 260, 243, 6.5x47 or 6x47. The receiver is billet, carriers 440C stainless,
bolts are 9310 alloy. They start at $1489, call for information
AR10 Customs
Armalite AR10 custom uppers in 308, 260, 243, 6.5x47 lapua, 6x47 Lapua start at $1159 and Rifles at $1699 with alum free float tube.
DPMS can not deliver parts in a timely manor, we do not build on DPMS parts
AR15 Customs
Currently chambering- 5.56 Wylde, 5.56x42, 6mmBR, 6mmBRX, .264 LBC(Les Baer-Grendel), 6.5BR uppers built on DPMS slickside receivers with Compass Lake float or Viking Tactics 13" TRX rail with PacNor barrel start at $1199, Krieger, Bartlein start at $1299, Hart, Broughton $1359
6.8 18" Match grade stainless coming soon
We are having a new 5R button made in 11.25 twist for the new lapped and air-gauged match grade barrels. These barrels will be the same profile as the 18"SS we have now but will be match grade and feature the "S Carb." treatment which will prolong the life of the barrel to surpass chrome-lined barrels while retaining the great stainless lapped bore finish. They should arrive in about 8-10 weeks. The cost will be apx $100 more than our production grade Recon.
We have found a source that will allow us to offer true "Match" quality uppers in 5.56 and 5.56x42(6.8 necked down to .224 will push a 75 Amax to 3050fps) that are capable of producing 1/2MOA. The 20" barrels are built from Krieger cut-rifled 7.7 twist H-Bar blanks. They will add apx $300 to our standard uppers or rifles, they are built to order and may take 8-10 weeks especially if a custom throat is requested.
.264 LBC big bolt (Les Baer's version of the Grendel)
Bolts and extensions similar to the 6mmBR bolts but, with a .450 recess/face for the 7.62x39 or 264 LBC -$169 bolt and extension, requires threading barrel .843-20.
THE NEXT GENERATION of muzzle control devices(MCD)started here patent pending.
First out in our new line of muzzle accessories is the 8 port MCD. The 8 port MCD is a combination brake/flash for those who want tunable muzzle control along with a flash suppressor. Instead of using large blasty ports in an attempt to reduce recoil and inturn muzzle climb like most brakes on the market, we decided to use the gas pressure to control the direction of muzzle movement. By changing which ports are open the gases can be directed to eliminate muzzle climb or left or right movement to keep the target in the sight picture for faster follow up shots and actually see the impact. The smaller ports in this MCD make it much quieter than most brakes while still effective as a muzzle control device.
Fluted on the bottom. Threaded 1/2-28 or 5/8-24 $69-$89.
Liquiblast
Are you tired of the beadblast finish on your stainless barrels rubbing off or scratching?
We are now using Liquiblast to etch 3X deeper into the stainless barrels finish, it looks
better and last much longer than conventional dry beadblasting.
