Skip to main content
#
AR PERFORMANCE

    Price:
    $0.01
    Items Remaining:out of stock

    General info first- Open 9-5 EST if you need to call. "tech@ar15performance.com" is the best email.  A limited amount of product is added to the site daily to keep wait times down. Still with the amount of orders we receive in a single night it keeps us busy and usually run 5-7 business days to ship depending on the parts ordered.  FEDEX will send an automated email with tracking info when the label is printed.

    SHIPPING
    Shipping Restrictions

    • ARP will not ship ANY items to the District of Columbia (Washington D.C.).
       
    • will not ship ANY items to the state of California, Massachusetts or Connecticut.
       
    • will not ship ANY AR Parts to Chicago, Illinois, Cook County, Illinois, or Deerfield, Illinois.


    Due to numerous shipping, fraud and theft problems over the last 9 years. We have a very strict ordering and shipping policy. We can ship by FEDEX or USPS to residence, business or post offices but the shipping address must match the billing address associated with the credit card used to place the order. We will no longer ship to apartments complexes. We are not taking any new customers in California.    You 68forums guys know what to do.
    All parts will require a signature upon delivery, Fed Ex or USPS for PO boxes

      Caliber choice opinion- If hunting deer and hogs the 6.8 makes more sense, it is a no fuss no muss work horse. There are more choices of hunting bullets and ammo and the 6.8 factory ammo is apx 100fps faster than the Grendel when the same length barrels and bullet weights are used.  If you reload the 6.8 can be loaded 200fps faster than the Grendel and do it without breaking bolts like the Grendel does.  A larger dia bullet moving 100fps faster = better terminal performance. SD does not mean anything, as soon as the bullet strikes something that SD figure is no longer valid.  The bullet construction and expansion is the most important thing for hunting. Having more hunting bullet choices and better terminal performance puts the 6.8 out front for hunting. If you reload and like wildcats the 30 Herrett is a HAMMER.   You can increase the accuracy and performance by using long load mags from Cavity back bullets. Loading longer than 2.295" will allow using more powder resulting in more velocity and it place the bullet closer to the lands resulting in better accuracy.

    All of our 6.8 barrels have a  high performance (SPCII type)chamber.

    ALL 6.8 ammo is the same size. All 6.8 chambers are the same size. All factory ammo will fit in a 6.8SPC, SPCII or ARP chamber. The only difference in the chambers is the length of the freebore. The length of the freebore can determine how accurate the barrels are. The 1:11.25 twist rate will accurately shoot any bullet from 80-120gr and most 130s. Solid copper bullets like the Barnes and Cavity Back work better in the 3R 1:10 barrels which will accurately shoot anything from 80-150gr.

    NOT 1 company loads factory 6.8 SPCII ammo. Since none of the companies will load factory ammo to the higher velocity I have done what I could to increase the velocity with the barrel and chamber design. The 5R and 3R 6.8 barrels sold here normally produce 60-100fps more than the common 11 twist 4 groove barrels when the same factory ammo is used in both types of barrels.

    The original 6.8 SPC chamber is comparable to the 223 chamber. The ARP chamber is comparable to the 223 Wylde chamber. The 6.8 SPCII chamber is comparable to the 5.56 Nato chamber.

    The 16 and 18" barrels have a tapered profile to keep rigidity up and weight down.

    BOLTS ARE NOT INCLUDED with a barrel. They are an option either below the barrel description or on the 'bolt/carrier"page.   Warning- We do not sell Nitride bolts and will warn all against using Nitride bolts. The Nitride treatment anneals carburized bolts. At some point in time the lugs will compres and headspce will increase to an unsafe level.

    Barrels are ported to work with standard carbine springs and buffers when used with Normal factory ammo producing 54000psi. Using weak ammo, heavier buffers or stronger spring may cause the rifle to short stroke or not strip ammo from the mag. Gas leaks in the system may also cause short stroking. Also if Carl is shooting the rifle overhead "skinny" style and not against his shoulder it may short stroke.

    The gas block boss on the barrels are sized to work with .750 diameter gas blocks, that does NOT mean the boss itself is exactly .750.

    If you use a reaction rod  to torque the barrel nut and shear the locating pin off it IS NOT covered under warranty. Because of the time involved to drill the old pin out the cost to repair will be $30 plus shipping.

     www.BlackstoneArms.com  in Texas is our only authorized builder of 6.8 uppers using ARP barrels.
    If you need brass, high performance bullets or long load mags try www.CavityBackBullets.com website.

     

    Reg. Price:
    $89.00
    Sale Price:
    $69.00
    Save:
    $20.00
    Items Remaining:11
    add product

    Enhanced strength 9310 alloy bolt, one of the most durable mil spec bolts on the market. Similar to JP Ent bolts. Mil spec parkerized rust resistant treatment(dark gray)   Flat rate shipping $3.75

     

    Reg. Price:
    $119.00
    Sale Price:
    $82.00
    Save:
    $37.00
    Items Remaining:5
    add product

    Works in the 6.8 SPC and 224 Valkyrie

    Bolt is dark gray, mag phoshate treated(mil spec)

    Our bolts are not just a normal AR15 bolt design made from 9310 like most of the others on the market.

    We have taken the current AR15 bolt to the next level by redesigning the lug and cam pin area as well using a stronger 9310 Vac-ARC alloy to make this the most  durable bolt on the market that will still work will mil spec barrel extensions.  Notice the thicker web between the recess and the lugs and the larger radius at the root of the lugs.  We do not stake the cam pin hole, in 10 years we never have. I just assume anyone building a rifle should know the extractor goes on the same side as the port door.

    This is a complete bolt only. It does NOT include any other parts.


    3 year conditional warranty
     The complete firearm upper half and  cartridge fired must be sent in for inspection. Receivers that are unsquare will cause the bolt to carry the load unevenly on the lugs which will cause early failure.  Square the receiver face or use Mega brand receivers. Overgassed systems will also cause early failure. Adjust the gas to eject the cases at 3-4 O'clock. Bolt face and firing pin hole erosion due to gases leaking around the primer or primer piercing voids the warranty. Bolts should be replaced around 5000 rounds.
    Do not use Remington 6 1/2, CCI 400, Fed 205 primers with any high pressure AR15 cartridge.
    Warning: Remington does not recommend this primer for use in the 17 Remington, 222 Remington, 223 Remington, 204 Ruger, 17 Remington Fireball. Use the 7-1/2 Small Rifle Bench Rest primer in these cartridges.
    This 6-1/2 Small Rifle primer is primarily designed for use in the 22 Hornet.

    Reg. Price:
    $79.00
    Sale Price:
    $60.00
    Save:
    $19.00
    Items Remaining:out of stock
    add product

    M16 carrier, phosphate treated, chromelined bore(where bolt rides).

    Shipping included

    Reg. Price:
    $179.00
    Sale Price:
    $129.00
    Save:
    $50.00
    Items Remaining:out of stock
    add product

    Look close at options below this description

    True Mil Spec M16 carrier, these are NOT civilian/commercial grade carriers- Parkerized and chrome lined. Same carriers used in Colt, FN and sold by BCM.  Complete BCG includes  9310 alloy enhanced bolts, firing pin , cam pin , cotter key assembled.

    When purchased with a barrel the bolts are headspaced with the barrel.

    Reg. Price:
    $179.00
    Sale Price:
    $149.00
    Save:
    $30.00
    Items Remaining:out of stock
    add product

    Look close at options below this description

    True Mil Spec M16 carrier, these are NOT civilian/commercial grade BCGs- Parkerized and chrome lined. Same carriers used in Colt, FN and sold by BCM.  Complete BCG includes  9310 alloy Superbolt(NiB coated)enhanced bolt, firing pin , cam pin , cotter key assembled.

    When purchased with a barrel the bolts are headspaced with the barrel.

    Reg. Price:
    $279.00
    Sale Price:
    $195.00
    Save:
    $84.00
    Items Remaining:23
    product

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8ARP(similar to Wylde) accurized chamber
    • Profile:  lightweight- tapers.750-700 under the guard/.750 gas block/.700 out front
    • Fluted: No
    • Barrel Length: 10.5"
    • Twist Rate: 1:11- Hybrid 3R rifling
    • Gas System: carbine Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 1lb-3oz

    .

    For use on pistols or NFA registered SBR lowers only. All NFA rules apply.

    Reg. Price:
    $279.00
    Sale Price:
    $195.00
    Save:
    $84.00
    Items Remaining:out of stock
    add product

    Due around 3rd week of Feb.

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8ARP(similar to Wylde) accurized chamber
    • Profile:  lightweight- tapers.750-700 under the guard/.750 gas block/.700 out front
    • Fluted: No
    • Barrel Length: 10.5"
    • Twist Rate: 1:11.25- Hybrid 5R rifling
    • Gas System: carbine Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 1lb-3oz

    .

    For use on pistols or NFA registered SBR lowers only. All NFA rules apply.

    Reg. Price:
    $279.00
    Sale Price:
    $200.00
    Save:
    $79.00
    Items Remaining:4
    product

    Due around 3rd week of Feb

    This is the favored barrel for those hunting hogs at night with a thermal device and suppressor.

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8ARP(similar to Wylde) accurized chamber
    • Profile: SCOUT lightweight- tapers.750-700 under the guard/.750 gas block/.700 out front
    • Fluted: No
    • Barrel Length: 12.5"
    • Twist Rate: 1:11.25- Hybrid 5R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 1lb-7oz

    .

    For use on pistols or NFA registered SBR lowers only. All NFA rules apply, be careful of changes.

    Reg. Price:
    $259.95
    Sale Price:
    $179.00
    Save:
    $80.95
    Items Remaining:5
    product

    These barrels are similar to the Wilson Combat barrels, the blanks are made by the same company. The rifling and configuration are the same(4 groove, 1:11 twist rate). The difference is these barrels are Melonite treated so they should last twice as long as the plain stainless barrels and be just as accurate without the high price. Barrels are BLACK

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The factory 6.8 ammo starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.
     
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Coupons are not allowed since these barrels are already marked way down, this allows everyone to buy at a reduced price and not just special groups.

    • Chamber: 6.8 SPCII
    • Profile: SCOUT lightweight-.Tapers .748-.696 under the guard /.750 GB/.700 out front
    • Fluted: No
    • Barrel Length: 16"
    • Twist Rate: 1:11  4 groove
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 416 SS
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 1lb 12.6oz

    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $279.00
    Sale Price:
    $200.00
    Save:
    $79.00
    Items Remaining:21
    product

    If it isn't stamped "ARP" it is not an AR Performance barrel. Years before most companies knew the 6.8 existed we were busy testing different rifling and chamber designs to make sure our 6.8 barrels performed better than any other production barrel on the market. They out perform some so called match barrels at a fraction of the cost.

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber. 
     
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    3R VS 5R- Solid copper bullets like the barnes and Cavity Back bullets may work better in the 3R barrels due to there is 40% less engraving force. You may be able to get more velocity out of the 3R barrels. Using lead core bullets there is no difference in accuracy between the 5R and 3R.

    • Chamber: 6.8 ARP(-similar to Wylde)accurized chamber. It is NOT smaller than the SPCII chamber.
    • Profile: SCOUT lightweight-.Tapers .748-.696 under the guard /.750 GB/.700 out front
    • Fluted: No
    • Barrel Length: 16"
    • Twist Rate: 1:11- Hybrid 3R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 1lb 12.6oz

    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $279.00
    Sale Price:
    $200.00
    Save:
    $79.00
    Items Remaining:out of stock
    product

    If it isn't stamped "ARP" it is not an AR Performance barrel. Years before most companies knew the 6.8 existed we were busy testing different rifling and chamber designs to make sure our 6.8 barrels performed better than any other production barrel on the market. They out perform some so called match barrels at a fraction of the cost.

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber. 
     
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    3R VS 5R- Solid copper bullets like the barnes and Cavity Back bullets may work better in the 3R barrels due to there is 40% less engraving force. You may be able to get more velocity out of the 3R barrels when handloading to maximum levels. Using lead core bullets there is no difference in accuracy between the 5R and 3R.

    • Chamber: 6.8 ARP(-similar to Wylde)accurized chamber. It is NOT smaller than the SPCII chamber.
    • Profile: T(tapered)-SCOUT lightweight-.Tapers .748-.696 under the guard /.750 GB/.700 out front
    • Fluted: No
    • Barrel Length: 16"
    • Twist Rate: 1:11.25- Hybrid 5R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 1lb 12.6oz

    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $279.00
    Sale Price:
    $210.00
    Save:
    $69.00
    Items Remaining:7
    product

    If it isn't stamped "ARP" it is not an AR Performance barrel. Years before most companies knew the 6.8 existed we were busy testing different rifling and chamber designs to make sure our 6.8 barrels performed better than any other production barrel on the market. They out perform some so called match barrels at a fraction of the cost.

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber. 
     
    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Barrel is STAINLESS, it is not black

    • Chamber: 6.8 ARP(-similar to Wylde)accurized chamber. It is NOT smaller than the SPCII chamber.
    • Profile: SCOUT lightweight-.Tapers .748-.696 under the guard /.750 GB/.700 out front
    • Fluted: No
    • Barrel Length: 16"
    • Twist Rate: 1:11.25- Hybrid 5R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 416R Stainless Steel
    • Finish: Sand finish stainless(not polished, not bead blasted, not lathe turn)
    • Process: Button Rifled
    • Barrel Lining: Stainless
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 1lb 12.6oz

    Bullfrog Rusthunter products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $279.00
    Sale Price:
    $200.00
    Save:
    $79.00
    Items Remaining:out of stock
    product

    If it isn't stamped "ARP" it is not an AR Performance barrel. Years before most companies knew the 6.8 existed we were busy testing different rifling and chamber designs to make sure our 6.8 barrels performed better than any other production barrel on the market. They out perform some so called match barrels at a fraction of the cost.

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8 ARP(-similar to Wylde)accurized chamber
    • Profile: SOCOM -.800/.750/.718- Similar to the real SOCOM barrel that relaced the M4 barrels except these barrels do not have the grenade launcher cuts.  Barrel also  very close to Navy RECCE barrel profile.
    • Fluted: No
    • Barrel Length: 16"
    • Twist Rate: 1:11.25- Hybrid 5R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24 with 11* crown
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb

    Bullfrog products are known to cause discoloration of Melonite surfaces.

    Reg. Price:
    $279.00
    Sale Price:
    $200.00
    Save:
    $79.00
    Items Remaining:25
    product

     Due Oct 14th

    -If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8 ARP(-similar to Wylde)accurized chamber.  It is NOT smaller than the 6.8 SPCII chamber.
    • Profile:  midweight-.Taper 840-745/.750/.700
    • Fluted: No
    • Barrel Length: 18"
    • Twist Rate: 1:11- Hybrid 3R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 2oz


    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Reg. Price:
    $279.00
    Sale Price:
    $200.00
    Save:
    $79.00
    Items Remaining:36
    product

    -If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8 ARP(-similar to Wylde)accurized chamber.  It is NOT smaller than the 6.8 SPCII chamber.
    • Profile:  midweight-.Taper 840-745/.750/.700
    • Fluted: No
    • Barrel Length: 18"
    • Twist Rate: 1:11.25- Hybrid rR rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 Chrome Moly Vanadium Steel
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 2oz


    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action with a .082 gas port, call or note on order if  you plan to use this plinking ammo.

    Reg. Price:
    $279.00
    Sale Price:
    $210.00
    Save:
    $69.00
    Items Remaining:22
    product

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8 ARP(-similar to Wylde)accurized chamber.  It is NOT smaller than the 6.8 SPCII chamber.
    • Profile:  midweight-.Taper 840-745/.750/.700
    • Fluted: No
    • Barrel Length: 18"
    • Twist Rate: 1:10- Hybrid 3R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 416 R stainless
    • Finish: SS
    • Process: Button Rifled
    • Barrel Lining: SS
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 2oz


    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action with a .078 gas port, call or note on order if  you plan to use this plinking ammo.

    Reg. Price:
    $329.00
    Sale Price:
    $259.00
    Save:
    $70.00
    Items Remaining:27
    product

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8 ARP(-similar to Wylde)accurized chamber.  It is NOT smaller than the 6.8 SPCII chamber.
    • Profile:  midweight-.Taper 840-745/.750/.700
    • Fluted: yes-Helical-flutes are bead blasted, barrel satin/sand  finish for a two tone look.
    • Barrel Length: 18"
    • Twist Rate: 1:11.25- Hybrid 5R rifling
    • Gas System: mid Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 416 R stainless
    • Finish: SS satin/sand (not bead blasted)
    • Process: Button Rifled
    • Barrel Lining: SS
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 2oz


    This is a complete barrel only, it does NOT include any other parts unless added below as an option.

    Remington fmj ammo may not be powerful enough to cycle the action with a .078 gas port, call or note on order if  you plan to use this plinking ammo.

    Reg. Price:
    $279.00
    Sale Price:
    $200.00
    Save:
    $79.00
    Items Remaining:out of stock
    add product

    Out of stock until May-

    If it isn't stamped "ARP" it is not an AR Performance barrel. Years before most companies knew the 6.8 existed we were busy testing different rifling and chamber designs to make sure our 6.8 barrels performed better than any other production barrel on the market. They out perform some so called match barrels at a fraction of the cost.

    If you are looking for a factory loaded AR  cartridge to hunt yotes, deer and hogs the 6.8 can't be beat in terminal performance. The exterior ballistics of the 6.8 and Grendel are within a few inches of each other all the way to 400yds. The 6.8 starts off 80-100fps faster with the same weight bullet and barrel length. The 6.8 has a great selection of usable hunting bullets. A 5.56 and a 6.8 could handle every possible need.

    Hi perf. chamber and match grade barrel allow for ANY factory ammo to be used along with the hottest handloads. The throat/freebore is designed to be more accurate with a wider range of bullets than the typical SPCII chamber.

    • Chamber: 6.8 ARP
    • Profile: midweight-.850/.750/.718
    • Fluted: No
    • Barrel Length: 20"-100fps increase over 16"
    • Twist Rate: 1:10- Hybrid 3R rifling designed to help accuracy with 120-130gr bullets and Barnes solid copper bullets
    • Gas System: rifle Length
    • Diameter at Gas Port: .750"
    • Muzzle Thread Pitch: 5/8x24
    • Material: 4150 CMV
    • Finish: Melonite
    • Process: Button Rifled
    • Barrel Lining: Melonite
    • Barrel Extension: M4
    • Assembly: Stripped
    • Weight: 2lb 10oz
    • Barrel is BLACK

    Reg. Price:
    $169.99
    Sale Price:
    $75.00
    Save:
    $94.99
    Items Remaining:5
    add product

    Price includes the barrel nut where AERO price online does not. This rail is below cost no coupons allowed.

    Rail is full diameter, apx 2" and will clear all adjustable gas blocks.

    Very lightweight but sturdy key mod rail.

    Shipping is flat rate CONUS $15.00

    Price:
    $20.00
    Items Remaining:5
    add product

    Mil spec charge handle. Includes shipping

     

      This business supports AMERICA and its Constitution

      We're in business for the Deplorables, Patriots, Infidels, protectors of the US Constitution, flag and President.
      We applaud the 50% who refused to let the democratic terrorist destroy this country.

      TRUMP 2020

      (ARP) AR15 Performance LLC

      Key West, FL 33040

      Hi performance 5.56 & 6.8 SPC barrels and parts since 2007

      The best way to contact is by email
      Email:  tech@AR15performance.com

      Phone: 801-750-4216  8am-5pm eastern time  M- Fri only
      Sorry we do not export anything and do not have a storefront. Everything must be purchased online.

      6.8 SPC II, 5.56, 223 wylde, 6.5 Grendel, 224 Valkyrie, 270-08, 30 Herrett, TAC 6, 224 Predator, 6mm Predator,  224 Grendel, 6mm Grendel